HOW TO

 

Banding the boot with band it style clamps:

We sell 2 types of banding tools in our TOOL AND ACCESSORIES category.  If you choose not to purchase a banding tool you can band the boot with a pair of needle nose pliers.  You will need to wrap the band around the boot and thread the end through the loop on the other end of the band. The tabs should be sticking up, away from the boot.  After it is threaded, you will need to grab the very end of the band with the pliers.  Now you will start to wrap the band around the tip of the pliers (as if opening a sardine can).  This will enable you to gain leverage.  Once you have enough leverage, pull the band back good and tight.  You will then tap the tabs down over the band to keep it securely in place.  To finish the installation, cut off the excess band.  You will use this process on both ends of the boot.  If you need further clarification on the bands, please call our tech line at 1-866-288-3003 and choose option # 2. 

 

How to videos coming soon.



Go Back